10-ton industrial reverse osmosis for water treatment plant

Model Number: ro10 Brand Name: Weizhen Key Specifications/Special Features: 1.Function introductionThe system is used for treating industrial water with 6T/h capacityIts operation is easy and with good qualityCompact installation can save much time for clientProduct water meets WHO drinking water standardThe pre-treatment and can be added to the system depending on client’s choice2.Features1.Large capacity, specially suitable for industries

2.Lower cost and easy to operate

3.High rejection rate with concentrate recycle system

4.Cleaning in place system is optional if necessary


3.Design basis

1,The raw water is sea water (TDS: 1500 --- 3000ppm)

Water input temperature: 4-45°C

2,Permeate output quality: TDS ≤300ppm, WHO direct drinking standard

3,Power supply: 380V/220V, 50/60Hz


4. Main components

Pre-treatment

a) CNP raw water pump

b) Quarta sand filter

c) Activated carbon filter

RO main plant

a) FRP Pressure vessel

b) CNP high pressure pump

c) SS coated carbon steel frame

d) 3S high/low pressure switch

e) 8" TFCRO membrane with 99% average salt rejection

380V, 50Hz


5.Optional components

a)304SS pressure vessel

b)CIP system

c)Concentrate recycle

d)Chemical dosing system

220/380V, 60Hz

Working procedure

The well water flow into raw water tank to adjust the capacity, and pump into quartz sand filter and activated carbon filter to filtrate the coll and the suspended matter, flow into cartridge filter to filtrate the matters and lower the SDI less than 4, the water from the filter flow to RO system for purifying